|
New 289 Cobra
Component List
Author: The New Shelby Cobra (more...)
COMPONENT LIST FOR BODY AND CHASSIS PACKAGE
Body
289 COBRA COMPONENT LIST FOR BODY AND CHASSIS PACKAGE
Body
- Fiberglass - handlaid with black gelcoat ready for prepping and painting
- Aluminum - riveted onto tubular substructure
- Hood, doors and trunk lid, all steel-frame hinged and latched to chassis
- Aluminum panels for the front inner fenders and inlet ducts for the
radiator and oil cooler
- Aluminum side louvers, S/C dashboard panel and transmission tunnel
Interior:
- Vinyl Seats
- Stewart-Warner Instruments:
- 180 MPH Speedometer
- Oil Temperature Gauge
- Oil Pressure Gauge
- Water Temperature Gauge
- 8000 RPM Tachometer
- Ampmeter
- Fuel Pressure Gauge
- Fuel Level Gauge
Chassis
- Main frame rails, 3-inch diameter D.O.M. round tube-fiberglass body
chassis with .125-inch wall, aluminum body chassis with .120-inch wall
- 1 1/8-inch D.O.M. .095-inch wall steel tube wheelbase length center truss
to accommodate H.O. engine stress (fiberglass body only)
- 1 1/2-inch D.O.M. tubular steel cowl hoop with .120-inch D.O.M. wall for
mounting steering column, windshield, dashboard and door hinges
- 1 1/4-inch D.O.M. tubular steel cowl hoop for door latches and rollbar
- 3/4-inch D.O.M. tubular steelframe for hinges and latches for hood and
trunk lid
- 1 1/2-inch rollbar assembly
- Racing-style quick-jack bumpers (4) and mounting hardware
Fuel System
- 18-gallon fuel cell w/ filler neck, LeMans cap, pickups, 2 electric pumps,
and 3/8-inch lines to engine compartment
Suspension, Brakes and Steering
- Custom aluminum housing for the Dana 44 differential with two Spicer
splined halfshaft assemblies
- Front and Rear uprights, drive hubs, dual adjustable A-arms, and coil-over
shocks
- Steering rack assembly with spacers, U-joints, steering column, tie rod
ends, and mounting hardware
- Brakes (master cylinders, pedal assembly, front and rear calipers, rotors,
connecting lines, fittings and emergency brakes with cables and handle)
Engine Compartment
- Headers and sidepipes
- Throttle pedal and linkage assembly
- Radiator electric fan
- Wiring harness with fuse box and starter solenoid
- Electrical relays for accessories (headlights, taillights, wiper motors,
fuel pumps, etc.)
Exterior and Interior Trim
- Windshield with windwings and sun visors
- Cobra and 289 Shelby emblems
- Seats, upholstery and carpeting
Specifications are subject to change at the discretion of Shelby
American
|
